PICKIT2 PICKIT3 PICKIT3.5 Programmer Offline Programming 

Description:

The PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R) Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), and it does this all at a most affordable price point. It can program a large range of PIC chips, including the PIC10F, 12F, 16F, PIC18F, 24F/H, dsPIC and PIC32 (future) families. Additionally it is firmware upgradeable, and Microchip regularly releases new firmware to support new PIC chips.

Included in this package are the PICKit 3 Programmer/Debugger, PICkit 3 Programming Software(via download), the MPLAB IDE Software(via download) and a A to mini-B USB cable. Please note that this is the PICkit 3 programmer only (Microchip part number PG164130), and does not include any demo boards!

Microchip part number PG164130. For details, see product page on Microchip’s site.
 

Features:
 

USB (Full speed 12 Mbits/s interface to host PC)

Real-time execution

MPLAB IDE compatible (free copy included)

Built-in over-voltage/short circuit monitor
 

PICKIT3.5 Programmer Description:
 

USB (Full speed 12 Mbits/s interface to host PC)

Real-time execution

MPLAB IDE compatible (free copy included)

Built-in over-voltage/short circuit monitor

Firmware upgradeable from PC/web download

Totally enclosed

Supports low voltage to 2.0 volts (2.0v to 6.0v range)

Diagnostic LEDs (power, busy, error)

Read/write program and data memory of microcontroller

Erase of program memory space with verification

Freeze-peripherals at breakpoint

Program up to 512K byte flash with the Programmer-to-Go

The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer\'s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).

Firmware upgradeable from PC/web download

Totally enclosed

Supports low voltage to 2.0 volts (2.0v to 6.0v range)

Diagnostic LEDs (power, busy, error)

Read/write program and data memory of microcontroller

Erase of program memory space with verification

Freeze-peripherals at breakpoint

Program up to 512K byte flash with the Programmer-to-Go

 

Universal Programmer Seat Description:

Instructions for use:

Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position.

The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position.

The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat can not be programmed the chip is programmed functions)
 

The seat supports the following programming microcontroller:

PIC16/18XX 40PIN Series devices (except 16F59)

PIC16/18XX 28PIN Series devices (except 16F57)

PIC16/18XX 18PIN Series devices

The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX)
 

Package list:
 

1pc X PICKIT3.5 Simulator

1pc X USB cable

1pc X 6pin cable

1pc x Universal Programmer Seat 

Contact Information:

Whatsapp: +1 937 888 0032

Live Support: Chat with us online

E-mail: sale@obdtools.net

Skype: jansonsh@hotmail.com

If you have any problem, please do not hesitate to contact us.